Welcome to Supex
<!– H1: Clear, keyword-optimized main title –>
<h1>Heavy-Duty Metal to Foam Adhesive – Permanent Industrial Bonding</h1>
<!– Lead Paragraph: Benefit-driven hook –>
<p>Searching for a <strong>foam adhesive</strong> that creates an unbreakable bond between metal and porous materials? Supex Metal-to-Foam Adhesive is engineered for professionals, fabricators, and DIYers who demand high initial grab, flexibility, and long-lasting durability without damaging delicate foam surfaces.</p>
<hr>
<!– H2: Features and benefits –>
<h2>Why Choose Supex Metal to Foam Adhesive?</h2>
<ul>
<li><strong>Instant High-Tack Grip:</strong> Minimizes clamp time by holding foam securely to vertical or overhead metal surfaces on contact.</li>
<li><strong>Non-Sag & Flexible Formula:</strong> Moves naturally with vibrations and thermal expansion without cracking or losing adhesion.</li>
<li><strong>Foam-Safe Technology:</strong> Specially formulated solvents won’t eat through or dissolve polyurethane, EVA, or acoustic foams.</li>
<li><strong>Weather & Moisture Resistant:</strong> Withstands extreme temperatures, humidity, and aging for dependable indoor and outdoor use.</li>
</ul>
<!– H2: Applications –>
<h2>Ideal Applications for Foam Bonding</h2>
<p>This versatile <strong>foam adhesive</strong> is trusted across multiple industries for demanding projects:</p>
<ul>
<li><strong>Automotive & Marine:</strong> Installing headliners, acoustic insulation, sound-deadening mats, and interior trim panels.</li>
<li><strong>HVAC & Ductwork:</strong> Bonding thermal insulation foam to galvanized sheet metal and air ducts.</li>
<li><strong>Upholstery & Furniture:</strong> Securing cushioning foam to steel or aluminum chair frames and custom builds.</li>
<li><strong>Packaging & Flight Cases:</strong> Lining metal transport cases with protective custom foam inserts.</li>
</ul>
<!– H2: Usage instructions –>
<h2>How to Apply Supex Foam Adhesive for Maximum Strength</h2>
<ol>
<li><strong>Surface Preparation:</strong> Ensure both metal and foam surfaces are clean, dry, and free from dust, grease, or oil. Wipe metal with a degreaser if necessary.</li>
<li><strong>Application:</strong> Apply an even coat to both substrates (or follow specific aerosol/liquid guidelines depending on your packaging). </li>
<li><strong>Tack-Up Time:</strong> Allow the adhesive to become tacky (typically 1 to 3 minutes) before bringing the surfaces together.</li>
<li><strong>Press Firmly:</strong> Apply uniform pressure across the entire bonding area to ensure maximum surface contact. Full cure achieved in 24 hours.</li>
</ol>
<!– Call to Action –>
<p><strong>Ready to upgrade your bonding process?</strong> Order your industrial-grade <strong>foam adhesive</strong> today and experience permanent, hassle-free results.</p>

100% Authentic products

25+ Years of expertise

Pan-India delivery
100% Authentic products
25+ Years of expertise
Pan-India delivery
Looking for a reliable metal to foam adhesive for industrial applications? Supex 505 is a high-quality, sprayable adhesive designed for a wide range of foam bonding needs.
Supex 505 is an SBS-based synthetic rubber contact adhesive. It offers fast drying, high solids and strong initial bonding strength. Its long tack life also gives users more time to position and join materials.
This industrial foam adhesive is ideal for furniture, mattress and automotive upholstery applications. It bonds foam to several surfaces, including wood, plywood, MDF and decorative laminates.
For metal to foam bonding requirements, contact the Supex technical team to confirm compatibility with your specific materials.
Supex 505 is designed to make foam bonding faster and easier. Its sprayable formula supports smooth application and efficient production.
These features make Supex 505 a practical choice for industrial foam bonding.

| Metal Substrates | Compatible Foam Types | Common Use Cases |
| Galvanized Iron (GI) Sheet | Acoustic Polyurethane Foam | HVAC duct acoustic lining |
| Raw & Anodized Aluminum | Memory / Cushioning Foam | Automotive & bus interiors |
| Stainless Steel | Closed-Cell EVA Foam | Machinery noise enclosures |
| Powder-Coated Metal Panels | Expanded Polyethylene (EPE) | Architectural wall paneling |
Supex 505 is designed for professional foam bonding applications across several industries.
Its fast drying and high green strength make it useful for production environments.
| Property | Typical Value |
|---|---|
| Product Name | Supex 505 |
| Adhesive Type | SBS-Based Sprayable Contact Adhesive |
| Base | Synthetic Rubber |
| Appearance | Light Yellow |
| Density at 25°C | 0.78–0.83 kg/ltr |
| Viscosity at 25°C | 60–100 cps |
| Drying Time | 5–35 seconds |
| Tack Retention Time | Approximately 3 hours |
| Application Method | Spray or Brush |
| Shelf Life | 12 Months |
These values are typical and may vary with application conditions.
Correct application helps achieve consistent bonding results. Follow these simple steps.
Step 1: Prepare the Surfaces
Make sure both surfaces are clean and dry. Remove dust, oil and grease before applying the adhesive.
Step 2: Apply the Adhesive
Apply an even layer of Supex 505 to both surfaces. Use a brush or suitable spray equipment.
Step 3: Allow the Adhesive to Dry
Wait until the adhesive becomes touch-dry. It should not transfer when lightly touched with the knuckles.
Step 4: Join the Surfaces
Align both surfaces carefully. Press them together firmly and avoid trapping air.
Step 5: Check the Bond
Make sure both surfaces have proper contact. Very porous materials may need a second coat.
For best results, complete bonding within 120 minutes of application. If this time is exceeded, a light spray coat may be needed to reactivate the surfaces.
Supex 505 is available in different pack sizes for small and large industrial requirements.
25L, 30 L and 200 L.
Contact Supex for packaging availability and bulk enquiries.
No Foam Melting: Low-solvent absorption protects delicate polyurethane, polyethylene, and acoustic foam cores.
Instant Tack: Rapid open time cuts clamp time and keeps assembly lines moving fast.
High Heat & Shear Resistance: Holds firm against vibration, humidity, and operating temperatures common in automotive and HVAC applications.
Controlled Spray Application: High-solids formula minimizes overspray, reduces misting, and covers more square meters per liter.
Whether you manufacture furniture, mattresses or automotive upholstery, Supex 505 offers a practical adhesive solution for compatible foam bonding applications.
For metal to foam adhesive requirements, our team can help you assess whether Supex 505 is suitable for your project.
1. What is Supex 505 used for?
Supex 505 is a sprayable foam bonding adhesive. It is used to bond foam to wood, MDF, plywood, decorative laminates, high-density foam and other compatible surfaces.
2. Can Supex 505 be used as a metal to foam adhesive?
Metal to foam compatibility is not confirmed in the current technical data sheet. Contact Supex for technical advice and testing before using it on metal surfaces.
3. Is Supex 505 suitable for mattress manufacturing?
Yes. Supex 505 is designed for foam and mattress applications. It offers fast drying and high initial bond strength.
4. What is the drying time of Supex 505?
Supex 505 has a typical drying time of 5–35 seconds. Actual drying time may vary with application conditions.
5. Can Supex 505 be applied with a spray gun?
Yes. Supex 505 can be applied using suitable spray equipment, including suction feed and pressure pot systems. Brush application is also possible.
6. What is the shelf life of Supex 505?
Supex 505 has a shelf life of 12 months from the date of manufacture when stored as recommended in sealed containers under dry conditions below 25°C.
7. Where can I buy Supex 505 adhesive?
You can contact Supex through www.supex.in for product details, bulk orders and technical assistance.
Need a sprayable metal to foam adhesive ? Supex 505 offers fast drying, high green strength and a long working tack life for industrial applications.
If you are searching for a metal to foam adhesive, our technical team can help you review your bonding requirements.
Get in touch for product enquiries, bulk orders and technical support.
Reach out out us for technical support, demo or distributor enquiry. Supex team will help you out at every step.
















Please fill out the form and we will reach back to you. We hope to work with you soon.
Reach out to us over phone, whatsapp & email
Thank you for taking the first step. Fill out the form and we will reach back to you. We hope to work with you soon.
You can also reach out to us over phone, whatsapp & email
Fill out the form and we will reach back to you
You can also reach out to us over phone, whatsapp & email for faster response