Supex 603 automotive Adhesive
Automotive Adhesive body sealant Supex 603UV, is a one-component, high-performance sealant based on advanced MS Polymer technology. This sealant is free of solvent, silicone and isocyanate. Its features includes fast-drying speed and excellent UV, weather and temperature resistance. The adhesion on various substrates is excellent even without the use of primer, and the sealant is paintable with most types of common industrial paints.
Uses of Supex 603 automotive adhesive sealant
- Bodywork assembly: MS polymer adhesives offer a strong and easy to apply system for bonding bus frames, truck cabins and body structures of trains.
- Sealing and bonding windows: one of the oldest MS polymer applications are sealing and bonding vehicle windows and windshields. The flexibility of MS polymer adhesives and sealants guarantee high performance on windows and windshields of vehicles.
- Sealing floors, roofs and interior and exterior panels: MS polymer systems are also used for sealing floors, roofs and side panels of vehicles. Their flexibility allows for high performance, whereas the minimum surface preparation and ability to bond dissimilar materials guarantee assembly efficiency.
Technical Data
Curing system : Moisture curing
Specific gravity : 1.55 g/ml
Tensile strength : 1.8 N/mm²
Elongation : 250%
Shore A hardness: 55
Skin-Form Time : 15 -30 minutes
FEATURES
- High strength and elastic
- Fast drying
- Paintable
- Primerless bonding to most substrates
- Isocyanate-free – No air bubbling
- Solvent-free – No shrinkage
How to use Supex HP 603 UV automotive adhesive
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
3. For a neat finishing, apply masking tape and remove it before sealant skins over.
4. Cut the tip off and puncture the internal foil seal with the nozzle. Cut the nozzle at 45° angle to desired bead-width and apply the sealant to substrate with a cartridge gun.
5. Tool the sealant within 15 minutes of extrusion before it skins. Tack-free in 30 minutes.
6. Uncured sealant can be cleaned up with mineral spirits.
PHYSICAL STATE: paste
COLOR: White, Beige, Black
PACKAGING: 290 mL/cartridge (20 cartridges/carton), 600 mL/sausage (20 sausages /carton)
SHELF LIFE: 12 months (cartridge), 12 months (sausages)
STORAGE: Store in a dry and cool place with temperature.
Advantages of MS polymer adhesive
- Bodywork assembly: MS polymer adhesives offer a strong and easy to apply system for bonding bus frames, truck cabins and body structures of trains.
- Sealing and bonding windows: one of the oldest MS polymer applications are sealing and bonding vehicle windows and windshields. The flexibility of MS polymer adhesives and sealants guarantee high performance on windows and windshields of vehicles.
- Sealing floors, roofs and interior and exterior panels: MS polymer systems are also used for sealing floors, roofs and side panels of vehicles. Their flexibility allows for high performance, whereas the minimum surface preparation and ability to bond dissimilar materials guarantee assembly efficiency.
- Bonds almost all substrates including sheet metal, aluminium, FRP, composite, concrete, glass, wood etc, except PP, LDPE, HDPE, Telfon.
- provides high strength, flexibility so very important in automobile body fabrication. absorbs shock and vibrations
- VOC free
- works on moist surface and underwater too
- paintable
- faster production due to faster tack free time than PU sealants.
Reviews
There are no reviews yet.