Supex offers a complete line of high performance Industrial adhesive & sealants. They consist of epoxy, silicone, polyurethane formulations. These products are designed to provide solutions to problems caused by wear/abrasion, chemical attack, mechanical damage, fatigue and erosion/corrosion. Common uses include repairing pipes, engine blocks, chutes, splines, fan housings, rubber, aluminum and stainless steel parts. 

Supex Anaerobic industrial Adhesive 

Nut, Bolts, fasteners loosenening industrial adhesive

Problem: loosening of fasteners, corrosion of threads- opening also difficult.

Solution: Anaerobic threadlocker Industrial adhesives

  • Fills the gap.
  • It cures to SOLID, rigid , thermoplastic polymer.
  • Assembly becomes ‘ONE’ !
  • Even during vibrations – complete assembly vibrates as one.
  • Therefore ‘No relative motion’ in between Nuts & bolts.
Leakage from Hydraulic, pneumatic threaded joints
mro adhesives sealants
Why leakage: 
  • Not 100% metal to metal contact
  • Damage in the thread
  • Weak tightening torque
  • Thermal cycle
  • Not sufficient sealant
  • Vibration, Impact
  • Excessive internal pressure

Benefits of Supex thread sealing.

  • It gives 100% sealing – Cures to tough thermoset plastic.
  • Instant Sealing – 3000 psi.
  • Allows adjustability – Positioning is possible
How to seal flanges 

industrial adhesive

Solution: Use anaerobic liquid gasket sealant for machined flanges, Silicone sealant for sheet metal, casted flanges.

Benefits: 100% leak free assembly, increase in structural strength, inventory of solid gaskets not required- one tube can make all types of gaskets. 

Assembly  of cylindrical parts

 Bearing loosening in housing, keyways damaged are common problems in mechanical maintenance. 

Anaerobic Retainers – Benefits

  • Ease of Assembly
  • Insite Application
  • 100% Contact
  • Eliminates Fretting
  • Proven Assembly Method

industrial adhesives

 

Silicone Sealants

  • Seal flanges, gasketing gasket maker
  • For the sealing between metal parts.
  • It is an essential product to use during the creation of gaskets that need to be heat resistant.
  • Finds large use in heating systems and kitchen machinery where heat resistant sealing is a very crucial affair.
  • Gaskets in pumps and motors also require the use of a heat sealing sealant.

 

MS adhesive & sealants

Bond & seal underwater, bonding heavy parts instantly, high gap fill
Features & advantages
  • High initial grab & final strength.
  • Does not require clamping, nailing or taping.
  • Does not stain surfaces or form bubbles during cure.
  • Does not corrode metals 
  • Stays permanently elastic. 
  • UV & weather resistant.  
  • No shrinkage  
  • Can be painted upon after 24 hours.    
  • Can bond to damp surfaces, seal wet areas and fix underwater leaks. 

Uses of MS Industrial adhesive

  • Seam and joint sealing in vehicle body
  • Railway carriage and container manufacture;
  • Ship and boat building; metal construction;
  • Electrical, plastics, air conditioning and ventilation industries;
  • Conventional vehicle window glazing between rubber profile and glass (good adhesion to most rubber qualities, even on EPDM-basis),
  • Bonding of floor coverings in bus
  •  Elastic bonding of panels or profiles to frames.
  • Mounting wall cladding elements such as ply, ACP, Plywood-laminate composite, alabaster on aluminum channel & wooden frames or walls.
  • Mounting stone slabs for kitchen countertops or dining tables.
  • Sandwiching wooden frames with stones under kitchen platforms for cabinet frame mounting purposes.
  • Fixing mirror/Painted Glass on tiles, plywood, Fiber cement, Bison Board and WPC board. 

Quick Steel epoxy paste 

Quick steel can be made to make permanent repairs of all materials except rubber. 

Features:

  • Sets steel hard within 15 to 30 minutes, even under water, achieving a full chemical cure within 60 minutes.  It is impervious to petrol, diesel, and oil – even battery acid.
  • Permanently bonds to aluminium, brass, copper, steel, PVC, fiber glass, plastics, glass, wood and more.
  • Repairs leaking fuel tanks, kerbed alloys, and stone damaged radiators, cracked sumps, stripped threads, and exhausts. Around the home it can fix anything from leaking guttering to a leaking central heating pipe.
  • Is 260°C (500°F) temperature resistant.
  • It is drinking water safe – NSF 61 certified.

Benefits of Metal repair epoxy putty stick

  • Efficient – use exactly what you need and no more
  • Designed for serious repairs – anywhere anytime!
  • No messy mixing (pre-measured)
  • Shelf life of more than 2 years

Suggested Industrial Use: Leaking Transformers, Filling of Cracks & Gaps in Metal / Stone / Wood, etc.

Industrial Adhesive

Request a Consultation

Mobile / Whatsapp: +91 9699892782. Email: sales@supex.in

Click Here
Summary
Article Name
Industrial Adhesive
Description
The MRO acronym is used to refer to the maintenance, repair, and operations used by a company to create an end product. MRO may include spare parts, equipment such as pumps and valves, consumables such as cleaning supplies, plant upkeep supplies such as lubricants, and activities completed to restore or maintain the functioning of needed equipment. Anything used in the manufacturing of, but not employed in, a final product may be considered MRO. The three main types of maintenance that fall under the MRO umbrella. Preventive Maintenance. This type of maintenance is done regularly before issues arise in order to keep equipment and processes running smoothly. Corrective Maintenance. This refers to maintenance completed after a problem has occurred, whether dealing with general wear and tear or a complete breakdown. Predictive Maintenance. Predictive maintenance is done based on the data obtained from monitoring processes that track historical trends, allowing for reliable failure predictions.
Author
Publisher Name
sales@supex.in
Publisher Logo