Weatherproof Silicone sealant
Supex WP+ weatherproof silicone sealant is a one part neutral curing sealant, with high performance, unaffected by extreme temperature and has excellent weatherability.
Supex WP+ All weather silicone sealant has excellent primer less adhesion to most common building materials.
Supex WP+ all weather silicone sealant is widely used in building & construction industries. It is also used to seal between the ACP in the Facade applications.
Features
- non corrosive
- low odour
- excellent UV resistance
- excellent weatherability
- internal / external use
TECHNICAL DATA Supex Weatherproof Silicone sealant | |
Properties | Specifications |
Appearance | Paste |
Odour | Low odour |
Specific Gravity | 1.42•0.02 |
Skinning Time, min | 10 |
Service Temperature,’C | -40 to + 150 |
Drop Degree, MM | 0 |
Hardness Shore A 2¢h | 30-40 |
Solid content,% | »90 |
7day Tensile Modulus MPa | >l.2 |
Elongation at break, % | >500 |
Testing Condition: Specimen is tested at (23+2) °C, (50+5)% relative humidity if not specified;
The above data of weatherproof silicone sealant WP+ is intended to provide guidance for use and should not be used to write product specifications
TYPICAL APPLICATIONS
- Supex WP+ is premium performance weatherproof silicone sealant specifically designed for general glazing and weather sealing in curtain wall and building
- It can be used to seal Various windo789 and
- Supex WP+ can be used for exterior and interior sealing in the building and construction
Benefits
- Easy of use – all temperature gunability, SUpex WP+ weatherproof silicone sealant is ready to use as supplied
- Primerless adhesion – upon curing will form a strong bond to most common building components without the use of a primer
- Long-life reliability – cured sealant stays elastomeric from -50°C to 150°C without hardening, cracking or becoming brittle under normal weather conditions
- Low Modulus – with extension/compression capability up to ±50% of original joint width
- Excellent weatherability, virtually unaffected by sunlight, rain, snow, ozone
STORAGE AND SHELF LIFE
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 27°C, humidity between 30%-70%.
Optimal storage is at the lower half of this temperature range and humidity range.
To prevent contamination of unused weatherproof silicone sealant, do not return any material to its original container.
HOW TO USE
- Surfaces to be adhered or sealed should be free of dirt, oil and other contaminants. For best performance clean the surface with a solvent such as IPA, Acetone or MEK.
- For Better Appearance use Masking Tapes to cover outside of Joint areas before
- Tool immediately after applying silicone sealant, Remove Masking tape before sealant skins.
Reviews
There are no reviews yet.