High temperature resistance flowable potting silicone compound
Flowable, 1-part silicone potting sealant, which cures at room temperature to form a tough rubber seal with high temperature resistance.
It is a flowable, smooth, 1-part RTV (room temperature vulcanizing) oxime silicone paste sealant that cures at room temperature on exposure to moisture in the air to form a tough, flexible, waterproof, oil-resistant silicone rubber bond. It resists temperatures up to 320°C for 1 hour, making it well suited for sealing applications with high temperature. It resists aging, weathering and thermal cycling without hardening, shrinking or cracking.
Technical Specifications
Un cured characteristics 25℃ and 50% RH | |
Performance | Indicator |
Chemical Type | Oxime |
Shelf Life | ＞360Days |
Specific Gravity(Gardner Cup) | 1.2 |
Color | White/black/gray etc. |
Tack-Free Time | ≤35min |
Cured after 72 hours at 25℃ and 50%RH | |
Tensile Strength | ≥1.5 Mpa |
Elongation | ≥150% |
Shore A | 40±5 |
*The above data is tested at 25℃ and 50% relative humidity. *Standard colors are white, black, gray. Other colors can be provided according to customer requirements. | |
Typical Applications of Silicone potting compound
For high temperature applications, Formed in place (FIP) sealing, Sealing. Supex 569FL has been designed to give outstanding performance in typical applications including valve covers, rocker covers, oil pans, water pumps, end seals.
This product is also used as a sealant and adhesive for assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting, and heating elements in electrical appliances.
Used as a potting compound in electronics industry
How to use Supex 569FL
- For best performance bond surfaces should be clean and free from
- Full performance properties will develop over 24
- Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is
- Excess material can be easily wiped away with non-polar agent.
- Excess cured material can be removed with a knife or single edge razor blade.
Reviews
There are no reviews yet.