Supex PU 6030B Automotive Sealant Adhesive
Supex 6030B is a cold applied PU adhesive specially designed for windshield replacement and gap filling in bus, truck and rail glass replacement. It provides a good weathering stability and is therefore suitable for exterior joints.
- 2 hours safe drive away time
- Suitable for bonding and gap filling Ideal product for glass replacement on commercial vehicles
- Exhibits good weathering stability Compatible with Black Prime- less and All Black installation process
- Solvent-free
Technical Data of Supex Automotive Sealant Adhesive
Test Std | Requirement | Typical value | |
Appearance | / | Black, homogeneous paste | / |
Density(g/ml) | GB/T 13477.2 | 1.2±0.1 | 1.25 |
Extrudability(ml/min) | GB/T 13477.4 | ≥60 | 80 |
Sagging properties (mm) | GB/T 13477.6 | ≤0.5 | 0 |
Tack free time (min) | GB/T 13477.5 | 20~45 | 40 |
Curing speed (mm/d) | HG/T 4363 | ≥3.0 | 3.2 |
Non-volatile contents ( %) | GB/T 2793 | ≥98 | 99 |
Shore A-hardness | GB/T 531.1 | 60~65 | 62 |
Tensile strength(MPa) | GB/T 528 | ≥8.0 | 9.0 |
Elongation at break(%) | GB/T 528 | ≥400 | 480 |
Tear strength( N/mm) | GB/T 529 | ≥10.0 | 12 |
Tensile-shear strength(MPa) | GB/T 7124 | ≥4.0 | 4.8 |
Service temperature(℃) | / | -40~90 |
Notes: All data above were tested under standardized condition at 23±2℃、50±5%RH
USES of Supex 6030B Automotive Sealant Adhesive
Supex 6030B has been specially designed as an all-in-one solution for the windshield replacement of commercial vehicles such as buses and trucks. Good weathering stability it can be used for both bonding and gap filling. This product and related process information is designed for Automotive Glass Replacement. For other applications, tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
How to use Supex Automotive Sealant
- Remove dust, oil and water from the surface of
- In order to ensure the bonding effect and compatibility between the product and the substrate, tests should be conducted in advance on the actual substrate and environment.
- Application environment temperature 5~35℃, humidity 50~70%RH. When the temperature below 5℃, it is recommended to keep products at 30~40℃ for 1 hour (No more than 3 hours).
Packaging:
Cartridge: 310 ml , Sausage: 600 ml, Drum: 240 Kgs
Transport
- Transport: Keep away the sealed product from moisture, the sun, high temperature and avoid
- Storage: Keep sealed into cool, dry Temperature: 5~25℃. Humidity: ≤50%RH.
- Shelf life: Cartridge and Sausage 9 month, Drum 6
Safety
- Keep away from
- Avoid contacting with skin. In case of contact with skin, remove the sealant by cloth, wash skin thoroughly with soap and water.
- For spillage in eye, hold eyelids apart and flush thoroughly with water, contact
Disclaimer
All recommendations concerning our products, including transportation, storage, and handing are based on our current knowledge and experience under normal conditions. In practical application, results may differ because of materials and actual site conditions change, our company do any guarantee and bear any legal responsibility. In order to ensure the bonding effect and the compatibility of products and materials, it is recommended to do the compatibility test or consult our company’s Technical Services before proceeding with the full application.
Reviews
There are no reviews yet.